Stainless Steel Horseshoe Barn Track System
Key: Stainless steel 304 Barn Track System, with great anti-rust ability, is aavailable in every decoration location and has better and longer service life.
Item: Stainless Steel Horseshoe Barn Track System
Specification: Designable in length and door hole. Width and thickness are 40*6mm accordingly.
Surface finishing: Nickle-plated with brushed surface.
Stainless Steel Horseshoe Barn Track System
Description
Sliding Rail: 1 peice, size 2 meters, uesd to under 1 m wide door,commonly rail length is 2 times more than the door
wide (open hole previously) Customized size available.
Sliding roller: 2 peices for 2 meter rail, the screw on the pulley uesed to 40 mm thickness door.
Decorative cover: 5 peices for 2 meter rail.Used to the joint between rail and wall, screws through the middle.The
distance will be 2 cm between door and wall after installing.
Screw: Number same as the decorative cover.Using for hard wall, if soft wall will use tapping screw.
Door stop: 2 piece. Installed on both ends of the rail and through the rail, prevent sliding roller skating out of rail.
Floor Guide: 1 piece.Should open slot under the door previously.(width: 0.7-1 cm, height: 2 cm),it's not on the ground.
Anti-bouncer: 2 piece.Installing in top of the door,under the rail, in order to avoid the door moves from the top rail.
Installation instructions: 1 part.
Stainless Steel Horseshoe Barn Track System
Stainless Steel Horseshoe Barn Track System
Stainless Steel Horseshoe Barn Track System
Stainless Steel Horseshoe Barn Track System
Stainless Steel Horseshoe Barn Track System
Hot Tags: stainless steel horseshoe barn track system, China, suppliers, manufacturers, factory, wholesale, customized
