What kind of situation is suitable for shower room
1. The toilet has a space of more than 900*900mm, which will not affect other equipment.
Smaller than this size, there is no need to make a shower room. Although there is a limit size of 800mm wide, it is easier to touch the glass with the elbow when taking a bath, and it is easier to hang the shower curtain.
2. Requires complete separation of dry and wet.
The normal height of the shower head is 2.1 meters, and the height of the shower room is basically above 1.8 meters to ensure that the shower water does not splash on top of the person's head. The height of the shower room can be selected according to the tallest family member.
3. Bathing is afraid of cold, especially when there are elderly people at home, the shower room can better keep warm.
What shape to choose for the shower room
1. In-line shower room
In most families, the shower area is located deep in the bathroom and occupies the entire wall. The in-line shower room divides the dry and wet areas into two halves.
A-shaped shower room
The glass partition is a minimalist version of the in-line shower room, which has the function of separating dry and wet to a certain extent, and the price is much cheaper.
Glass partition
2. Square shower room
There is no way to fill the entire wall like a straight shape, just use a square to occupy a corner, of course, it must also meet the space requirement of 900*900mm.
3. Diamond-shaped shower room
Some toilets have a limited area, and the square right angle may be close to the toilet, which is relatively cramped. Cut off the right angle to become a diamond shape, the external passage of the shower room can be much looser, and there is room for opening the door.
Diamond shaped shower room
4. Arc shower room
The arc shape is also a square variant, which is more suitable for elderly people at home, and will not bump into it.
The arc-shaped shower room can be fully customized, and there is no saying that the arc-shaped glass is difficult to process and cannot be customized. 850mm*850mm is the limit size, no matter how small it is, it is like being locked in a cage.
Arc shower room
What to pay attention to when installing the shower room
1. The water-retaining strips are advanced in the field, and the bricklayers pre-embed the water-retaining strips when placing the floor tiles without glue.
In doing so, one is strong and stable, and the other is that the tiles have a certain drainage slope, but the water retaining strip must be level and cannot be placed on the floor tiles.
Therefore, before tiling, you must choose the shower room and pay the deposit before you can agree to take the water retaining strip home.
If you really fail to bury the water-retaining strips before tiling, you can only apply glue on the tiles to fix the water-retaining strips. The glue must be of good quality, otherwise the glue will gradually age after a long time, and the water in the shower room will seep out.
White arc water retaining strip
2. When the installer enters the site, first check whether the materials are the same as those seen in the store. You can pay attention to the small things such as hardware and pulleys.
3. After installation, check whether the glass is damaged, especially the four corners of each side of the glass, which are weak and easy to break. It also depends on whether the corners are treated smoothly and whether the chamfers are rounded.
4. Regardless of whether the sliding door or the swing door is opened, open and close it several times to test whether it feels smooth and consistent with the original experience in the store. If it feels very astringent, there may be a problem with the installation, and the installer is still dealing with it in time.
